Unzip the case lining and take a look at the reverse side of the wheel unit. You should be able to see screws, rivets or both.
Un-screw the screws and drill off the rivets (being careful not to heat the rivet too much with the drill, as this will melt the housing).
After completing step 2 the housing should come out of the case easily. You must now examine the axis pin, as it needs to come out. If you are lucky, the pin will be held in with either a grub screw or surclip these come out easily. Other axis pins need drilling out carefully, once again do this without heating up the pin or melting the housing.
Replace the old wheel with the new one and replace the axis pin. If you had to drill out the axis pin, you may need to buy a new one (our product code ohl2185).
Put the unit back into the case. If you had to drill out any rivets, you can simply use a nut and bolt of the correct diameter and size.
Hi would like to thank you and your team for prompt service on the 2 x eight martingales I ordered from you I have now just ordered 2 x 5 martingales from you today as so pleased with quality as well as service would like to wish you all a very happy Christmas and hopefully a better new year. A.H., Wallingford, December 2023
23 High St, Chesham, Buckinghamshire, HP5 1BG, England