Suitcase Wheel 42mm CW5
Suitcase Wheel 42mm CW5
Suitcase Wheel 42mm CW5
Suitcase Wheel 42mm CW5

Suitcase Wheel 42mm

FREE POSTAGE TO UK!

Product Code: CW12


Price: £5.64 (£4.70 ex VAT)
5.72 USD, 5.46 EUR, 38.31 CNY, 776.33 JPY

This is a replacement wheel for those people who are unable to obtain a complete wheel unit for their suitcase and are considering changing the wheel alone. Quite often the wheel has worn a flat spot where a stone has wedged itself into the unit making the wheel drag rather than turn as it should.
This wheel is usually found on the swivel type, it has no bearings.

The dimensions are as follows:

Wheel Diameter:42mm
Wheel Width: 20mm
Axis Hole Diameter:6mm

Help: Replacing Luggage Wheels

Choose options:

Quantity:

Please consider the options below before adding to your cart.

Optional ExtraAdditonal price
Replacement Wheel Axis Pin ohl2185This is a replacement wheel pin for those people who are trying to replace their suitcase wheel. The pin comes in two parts and we recommend once fitted that you use thread lock to ensure it doesn't come loose. The dimensions are as follows: Diameter: 5.5mm Total Length: 39mm Length excluding nut and screw: 35mmAdd Replacement Wheel Axis Pin

Price:
£3.60
(£3.00 ex VAT)
3.65 USD, 3.49 EUR, 24.45 CNY, 495.53 JPY

Add it



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Suitcase Wheel


Suitcase Wheel 42mm CW5

Suitcase Wheel


Suitcase Wheel 42mm CW5

Suitcase Wheel


Suitcase Wheel 42mm CW5

Back to product

Replacing Luggage Wheels

Step 1 Unzip the case lining and take a look at the reverse side of the wheel unit. You should be able to see screws, rivets or both.
Step 2 Un-screw the screws and drill off the rivets (being careful not to heat the rivet too much with the drill, as this will melt the housing).
Step 3 After completing step 2 the housing should come out of the case easily. You must now examine the axis pin, as it needs to come out. If you are lucky, the pin will be held in with either a grub screw or surclip these come out easily. Other axis pins need drilling out carefully, once again do this without heating up the pin or melting the housing.
Step 4 Replace the old wheel with the new one and replace the axis pin. If you had to drill out the axis pin, you may need to buy a new one (our product code ohl2185).
Step 5 Put the unit back into the case. If you had to drill out any rivets, you can simply use a nut and bolt of the correct diameter and size.

Back to product