Home | Spare Parts | Replacement Briefcase Hasps

Large Bevelled Brass Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Large Bevelled Brass Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Large Bevelled Brass Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Large Bevelled Brass Briefcase Hasp.






Bevelled Brass Briefcase Hasp SOCS1
Bevelled Brass Briefcase Hasp SOCS1
Bevelled Brass Briefcase Hasp SOCS1
Bevelled Brass Briefcase Hasp SOCS1

Large Bevelled Brass Briefcase Hasp

FREE POSTAGE TO UK!

Product Code: SOCSH1


Price: £15.60 (£13.00 ex VAT)
15.81 USD, 15.11 EUR, 105.95 CNY, 2,147.29 JPY

This OCS Hasp is solid brass with a distinctive bevelled top. It is an appropriate replacement catch for many top quality briefcases.Please do check the dimensions and details closely, as slight differences in design may mean certain spares won't work with your briefcase.

Dimensions 53mm (closed length) 40mm wide. Hole centres 28mm.

Suits either left or right hand locks.

This range of replacement parts is useful for practically minded people, who have a broken briefcase they do not want to part with and who do not have a saddler or luggage repairer in their neighbourhood.

Help: Fitting A Briefcase Hasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Bevelled Brass Briefcase Hasp


Bevelled Brass Briefcase Hasp SOCS1

Bevelled Brass Briefcase Hasp


Bevelled Brass Briefcase Hasp SOCS1

Bevelled Brass Briefcase Hasp


Bevelled Brass Briefcase Hasp SOCS1

Bevelled Brass Briefcase Hasp


Bevelled Brass Briefcase Hasp SOCS1

Bevelled Brass Briefcase Hasp


Bevelled Brass Briefcase Hasp SOCS1

Back to product

Fitting A Briefcase Hasp

Step 1 Peel back the organiser section in the lid by about 5 inches. Don't worry about the stitching as it is dummy stitched.
Step 2 Peel back the leather that covers the underside of the hasp you wish to replace. Once again don't worry about the stitching.
Step 3 You should by now have revealed the back of the rivets that hold the hasp onto the case. Two types of rivet are commonly used. The first type has two legs that can be straightened with a flat headed screwdriver and extracted. The second usually has a washer capping it on the inside which can be carefully drilled out with a cordless drill.
Step 4 Put the new hasp on, tapping down the new rivets with a hammer and reverse the process gluing the lining as you go (Evo-stick is best).

Back to product