Cookie Consent by Popupsmart Website

Home | Spare Parts | Replacement Briefcase Hasps

Surface Mounted Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Surface Mounted Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Surface Mounted Briefcase Hasp.

Home | Spare Parts | Replacement Briefcase Hasps

Surface Mounted Briefcase Hasp.






Surface Mounted Antique Brass Briefcase Hasp sabh1
Surface Mounted Antique Brass Briefcase Hasp sabh1
Surface Mounted Antique Brass Briefcase Hasp sabh1
Surface Mounted Antique Brass Briefcase Hasp sabh1

Surface Mounted Briefcase Hasp

UK Post £4.95. Spend £30.00 more for free UK postage.

Product Code: sabh1


Price: £10.20 (£8.50 ex VAT)

This surface mounted, briefcase hasp is compatible with the surface mounted lock shown below. It is attached to the briefcase using steel prongs rather than rivets.The Hasp is currently only available in black because the antique brass and satin chrome finished have been discontinued.

Dimensions 47mm (closed length) 33mm wide. Prong centers 23mm.

Suits either left or right hand locks.

This range of replacement parts is useful for practically minded people, who have a broken briefcase they do not want to part with and who do not have a saddler or luggage repairer in their neighborhood.

Help: Fitting A Briefcase Hasp

Choose options:

Colours:
Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Surface Mounted Antique Brass Briefcase Hasp


sabh6 prongs

Surface Mounted Antique Brass Briefcase Hasp


sabh6 front

Surface Mounted Antique Brass Briefcase Hasp


sabh6 side

Surface Mounted Antique Brass Briefcase Hasp


sabh6

Surface Mounted Chrome Briefcase Hasp


Surface Mounted Antique Brass Briefcase Hasp sabh1

Surface Mounted Black Briefcase Hasp


Surface Mounted Antique Brass Briefcase Hasp sabh1

Surface Mounted Black Briefcase Hasp


Surface Mounted Antique Brass Briefcase Hasp sabh1

Back to product

Fitting A Briefcase Hasp

Step 1 Peel back the organiser section in the lid by about 5 inches. Don't worry about the stitching as it is dummy stitched.
Step 2 Peel back the leather that covers the underside of the hasp you wish to replace. Once again don't worry about the stitching.
Step 3 You should by now have revealed the back of the rivets that hold the hasp onto the case. Two types of rivet are commonly used. The first type has two legs that can be straightened with a flat headed screwdriver and extracted. The second usually has a washer capping it on the inside which can be carefully drilled out with a cordless drill.
Step 4 Put the new hasp on, tapping down the new rivets with a hammer and reverse the process gluing the lining as you go (Evo-stick is best).

Back to product