Cookie Consent by Popupsmart Website

Home | Spare Parts | Replacement Briefcase Hasps

Brushed Brass Briefcase Hasp for briefcases.

Home | Spare Parts | Replacement Briefcase Hasps

Brushed Brass Briefcase Hasp for briefcases.

Home | Spare Parts | Replacement Briefcase Hasps

Brushed Brass Briefcase Hasp for briefcases.

Home | Spare Parts | Replacement Briefcase Hasps

Brushed Brass Briefcase Hasp for briefcases.






closed
closed
closed
closed

Brushed Brass Briefcase Hasp for briefcases

UK Post £4.95. Spend £30.00 more for free UK postage.

Product Code: ohl1419bb


Price: £13.96 (£11.63 ex VAT)

This is the most popular large solid brushed brass briefcase hasp. It is an appropriate replacement hasp for many briefcase combination/ key locks however, do check dimensions and detail closely, as slight differences in design may mean certain spares won't work with your briefcase. This hasp however has a more accommodating catch which tends to make it suitable for more locks. The hole in the hasp into which the latch engages is 9mm x 4mm.

Dimensions 46mm (closed length) 31mm wide. Hole centres 23mm.

Suits either left or right hand locks.

This range of replacement parts is useful for practically minded people, who have a broken briefcase they do not want to part with and who do not have a saddler or luggage repairer in their neighbourhood.

Help: Fitting A Briefcase Hasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Brushed Brass Briefcase Hasp


closed

Brushed Brass Briefcase Hasp


open

Brushed Brass Briefcase Hasp


closed

Back to product

Fitting A Briefcase Hasp

Step 1 Peel back the organiser section in the lid by about 5 inches. Don't worry about the stitching as it is dummy stitched.
Step 2 Peel back the leather that covers the underside of the hasp you wish to replace. Once again don't worry about the stitching.
Step 3 You should by now have revealed the back of the rivets that hold the hasp onto the case. Two types of rivet are commonly used. The first type has two legs that can be straightened with a flat headed screwdriver and extracted. The second usually has a washer capping it on the inside which can be carefully drilled out with a cordless drill.
Step 4 Put the new hasp on, tapping down the new rivets with a hammer and reverse the process gluing the lining as you go (Evo-stick is best).

Back to product