Home | Spare Parts | Replacement Briefcase Hasps

Small Bevelled Brass Hasp for briefcase locks.

Home | Spare Parts | Replacement Briefcase Hasps

Small Bevelled Brass Hasp for briefcase locks.

Home | Spare Parts | Replacement Briefcase Hasps

Small Bevelled Brass Hasp for briefcase locks.

Home | Spare Parts | Replacement Briefcase Hasps

Small Bevelled Brass Hasp for briefcase locks.






Small Bevelled Brass Briefcase Hasp
Small Bevelled Brass Briefcase Hasp
Small Bevelled Brass Briefcase Hasp
Small Bevelled Brass Briefcase Hasp

Small Bevelled Brass Hasp for briefcase locks

FREE POSTAGE TO UK!

Product Code: ja1rhbr


Price: £15.22 (£12.68 ex VAT)
15.66 USD, 14.95 EUR, 105.96 CNY, 2,007.60 JPY

This is another small solid bevelled brass briefcase hasp with slightly differently spaced rivet holes. It is an appropriate replacement catch for many briefcase key/ combination locks however, do check dimensions and detail closely, as slight differences in design may mean certain spares won't work with your briefcase.

Dimensions 43mm (closed length) 33mm wide. Hole centres 25mm.

Suits either left or right hand locks.

This range of replacement parts is useful for practically minded people, who have a broken briefcase they do not want to part with and who do not have a saddler or luggage repairer in their neighbourhood.

Help: Fitting A Briefcase Hasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Fitting A Briefcase Hasp

Step 1 Peel back the organiser section in the lid by about 5 inches. Don't worry about the stitching as it is dummy stitched.
Step 2 Peel back the leather that covers the underside of the hasp you wish to replace. Once again don't worry about the stitching.
Step 3 You should by now have revealed the back of the rivets that hold the hasp onto the case. Two types of rivet are commonly used. The first type has two legs that can be straightened with a flat headed screwdriver and extracted. The second usually has a washer capping it on the inside which can be carefully drilled out with a cordless drill.
Step 4 Put the new hasp on, tapping down the new rivets with a hammer and reverse the process gluing the lining as you go (Evo-stick is best).

Back to product