Cookie Consent by Popupsmart Website
Brass Finish Handbag Turnclasp CTL2
Brass Finish Handbag Turnclasp CTL2
Brass Finish Handbag Turnclasp CTL2
Brass Finish Handbag Turnclasp CTL2

Brass Finish Oval Handbag Turnclasp

UK Post £4.95. Spend £30.00 more for free UK postage.

Product Code: CTL2


Price: £7.80 (£6.50 ex VAT)
8.64 USD, 7.80 EUR, 60.65 CNY, 1,246.97 JPY

This replacement flap catch is quite common in flap over handbags. It is Brass coloured and comes with a back plate for the turnkey base plate together with a screw together front plate .It is a slightly smaller version of the C1212 ANTB.
Dimensions are as follows:

Top Plate (with the hole in): 63mm x 35mm
Bottom Plate (with turn key): 28mm x 15mm
Turn Key Length: 13mm
Hole Dimensions: 17mm x 7mm

This range of replacement parts is useful for practically minded people, who have a broken handbag or briefcase they do not want to part with and who do not have a saddler or luggage repairer in their neighbourhood.

If you have any queries about the suitability of this luggage spare or would like us to carry out the repair, please call +44 1494 775577 and ask to speak to Paul.

Help: How to Replace A Handbag Turnclasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Brass Finish Handbag Turnclasp


Brass Finish Handbag Turnclasp CTL2

Brass Finish Handbag Turnclasp


Brass Finish Handbag Turnclasp CTL2

Back to product

How to Replace A Handbag Turnclasp

Replacing A Handbag Turnclasp

Step 1 Check that the back plate is compatible with the existing front plate.
Step 2 We would unstitch a seam and fix the plate but you might find it easier to cut the lining. This can be very neat if executed correctly.
Step 3 Once you have made a neat cut inside the lining, you will probably see the patch that covers the back of the catch, peel this off.
Step 4 The next step is to lift the legs of the broken clasp (sometimes there are screws instead. Take the backplate off and release the broken clasp.
Step 4 Once the old clasp is off, offer the new one up and mark the holes required for the spikes on the front panel. If you are happy with the position, make the holes (I use a small blade) and push the new clasp on.
Step 4 Put the backplate on (I have pushed the spikes right through the lining and held it all in place with the back plate but its your choice) and bend the spikes over, to trap the backplate (and possibly lining) in position.
Step 4 Patch the backplate with a piece of material or stitch it up (I have had great results with some thin leather and double sided tape on the backplate). Finished

Back to product