Cookie Consent by Popupsmart Website

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Antique Brass - Handbag Drop Catch

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Antique Brass - Handbag Drop Catch

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Antique Brass - Handbag Drop Catch

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Antique Brass - Handbag Drop Catch






Antique Brass Handbag Drop Catch CXDC2ANTB
Antique Brass Handbag Drop Catch CXDC2ANTB
Antique Brass Handbag Drop Catch CXDC2ANTB
Antique Brass Handbag Drop Catch CXDC2ANTB

Antique Brass Handbag Drop Catch.

UK Post £4.95. Spend £30.00 more for free UK postage.

Product Code: CXDC2ANTB


Price: £6.60 (£5.50 ex VAT)
6.97 USD, 6.41 EUR, 50.28 CNY, 1,053.92 JPY

This replacement drop catch is for flap over handbags. It is Antique Brass coloured and is made to locate through a brass opening on the flap of a handbag.

Dimensions
Male Section:
Base plate: 35mm x 12mm
Length (when open) 39mm

Female Section:

Plate: 44mm x 20mm
Opening: 30mm x 6mm
Maximum Thickness of Bag Flap: 3mm



If you have any queries about the suitability of this luggage spare, please call +44 1494 775577 and ask to speak to Paul.

Help: How to Replace A Handbag Turnclasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

Other pictures

Antique Brass Handbag Drop Catch


Antique Brass Handbag Drop Catch CXDC2ANTB

Antique Brass Handbag Drop Catch


Antique Brass Handbag Drop Catch CXDC2ANTB

Back to product

How to Replace A Handbag Turnclasp

Replacing A Handbag Turnclasp

Step 1 Check that the back plate is compatible with the existing front plate.
Step 2 We would unstitch a seam and fix the plate but you might find it easier to cut the lining. This can be very neat if executed correctly.
Step 3 Once you have made a neat cut inside the lining, you will probably see the patch that covers the back of the catch, peel this off.
Step 4 The next step is to lift the legs of the broken clasp (sometimes there are screws instead. Take the backplate off and release the broken clasp.
Step 4 Once the old clasp is off, offer the new one up and mark the holes required for the spikes on the front panel. If you are happy with the position, make the holes (I use a small blade) and push the new clasp on.
Step 4 Put the backplate on (I have pushed the spikes right through the lining and held it all in place with the back plate but its your choice) and bend the spikes over, to trap the backplate (and possibly lining) in position.
Step 4 Patch the backplate with a piece of material or stitch it up (I have had great results with some thin leather and double sided tape on the backplate). Finished

Back to product