Cookie Consent by Popupsmart Website

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Gold Finish Turn Lock for handbags 36mm x 25mm.

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Gold Finish Turn Lock for handbags 36mm x 25mm.

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Gold Finish Turn Lock for handbags 36mm x 25mm.

Home | Spare Parts | Replacement Handbag and Briefcase Fasteners

Gold Finish Turn Lock for handbags 36mm x 25mm.






Gold Finish Turn Lock for handbags 36mm x 25mm CXTL10
Gold Finish Turn Lock for handbags 36mm x 25mm CXTL10
Gold Finish Turn Lock for handbags 36mm x 25mm CXTL10
Gold Finish Turn Lock for handbags 36mm x 25mm CXTL10

Gold Finish Turn Lock for handbags 36mm x 25mm

UK Post £4.95. Spend £30.00 more for free UK postage.

Product Code: CXTL10


Price: £9.60 (£8.00 ex VAT)
10.19 USD, 9.72 EUR, 74.01 CNY, 1,554.57 JPY

This replacement turn lock is quite common in flap over handbags. It is gold coloured. Supplied with backplate. Male section attaches to the bag via 2 maleable spikes and the female part via 2 grub screws (supplied).

Dimensions of female section are 36mm x 25mm.

If you have any queries about the suitability of this luggage spare, please call +44 1494 775577 and ask to speak to Paul.

Help: How to Replace A Handbag Turnclasp

Choose options:

Quantity:



Any questions? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Fri 9.30 a.m. to 5.00p.m.

 

How to Replace A Handbag Turnclasp

Replacing A Handbag Turnclasp

Step 1 Check that the back plate is compatible with the existing front plate.
Step 2 We would unstitch a seam and fix the plate but you might find it easier to cut the lining. This can be very neat if executed correctly.
Step 3 Once you have made a neat cut inside the lining, you will probably see the patch that covers the back of the catch, peel this off.
Step 4 The next step is to lift the legs of the broken clasp (sometimes there are screws instead. Take the backplate off and release the broken clasp.
Step 4 Once the old clasp is off, offer the new one up and mark the holes required for the spikes on the front panel. If you are happy with the position, make the holes (I use a small blade) and push the new clasp on.
Step 4 Put the backplate on (I have pushed the spikes right through the lining and held it all in place with the back plate but its your choice) and bend the spikes over, to trap the backplate (and possibly lining) in position.
Step 4 Patch the backplate with a piece of material or stitch it up (I have had great results with some thin leather and double sided tape on the backplate). Finished

Back to product