Home | Spares for Leathergoods, Suitcases & Handbags | Replacement Soft Briefcase Combination Locks

Side Release Combination Lock in Gunmetal


Gunmetal Side Release Combination Lock


data-pin-do="buttonPin" data-pin-config="none">Gunmetal Side Release Combination Lock CXCBK6

Product Code: CXCBK6

This replacement two dial combination lock suits many Briefcases/ Folios. It gunmetal and measures 57mm x 32mm. It will take a leather flap of up to 5mm in thickness.
The lock has buttons on the side which, when pressed, will release the lock and enable the flap of the briefcase to be lifted.
Price: £15.40 (£12.83 ex VAT) 16.46 USD US Dollars, 14.42 EUR Euros, 1,856.78 JPY Japan Yen
Quantity:
Click on thumbnail to enlarged picture

Gunmetal Side Release Combination Lock


Gunmetal Side Release Combination Lock CXCBK6

Gunmetal Side Release Combination Lock


Gunmetal Side Release Combination Lock CXCBK6

Gunmetal Side Release Combination Lock CXCBK6

Gunmetal Side Release Combination Lock


Gunmetal Side Release Combination Lock CXCBK6

Would you like to check stock availability? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Sat 9.30 a.m. to 5.00p.m. Please Note: We do not accept orders by telephone and enquiries are better placed by email too. When ordering on-line, please note that we do not deduct any money from your credit card, until the goods are being despatched. Please also note that you may alter the quantity of goods in your basket at any time.

 

Fitting A Briefcase Lock

Step 1 Remove the old hasp from the flap by un-screwing it or drilling out the screws.
Step 2 Put the new hasp on the Flap of the case and secure in place with the grub screws.
Step 3 Cut the lining or un-stitch a seam to reveal the back of the old lock.
Step 4 Prise up the metal prongs securing the old lock remove the back plate and then remove the lock.
Step 5 To ensure correct positioning of the new lock engage it into the hasp on the flap and (whilst the lock is engaged) gently press the lock prongs into the main panel of the bag.
Step 6 After the above method you should see 4/2 prong marks indicating where you need to cut the panel. Cut the panel gently with a craft knife ensuring the slot is not too long (its easy to apply too much pressure with a sharp knife).
Step 7 Push the prongs through the slots and on the inside put the back plate over the prongs and fold them down.
Step 8 Once you are happy the lock is in the correct position (having opened and close it a couple of times) stick/ stitch the lining back. (A patch can be cut and stuck with evo-stick or you could simply use a fabric tape.)