Cox the Saddler

23 High St, Chesham, Buckinghamshire, HP5 1BG, England. sales@saddler.co.uk

Sign In | Register
A traditional leather goods store

Order in next 13 hours and 3 minutes for despatch today.
Newsletter
For coupon codes, news and information

Home | Saddlery | Gag Cheeks

Gag Cheeks with Stud Fastening


Our Leathergoods Repair Service is suspended now until 2018 as it is such a busy time of year. If you need advice though, just email repair@saddler.co.uk, ideally attaching a picture.


data-pin-do="buttonPin" data-pin-config="none">Gag Cheeks with Stud Fastening

Product Code: MBGCS

These gag cheeks with stud fastening are made by E. Jeffries in Walsall England from best quality bridle leather. They are available in 5/8 or 3/4 inch widths and in havana brown or black. The 3/4 inch width version measures 16 inches in length from the end of the buckle to the end of the ring. Make your choice of size and colour using the pull down menus.

Price: 49.94 (41.62 ex VAT)

(Approx. 55.38 USD US Dollars, 46.77 EUR Euros, 6,160.01 JPY Japan Yen)

Colour:
Width:
Quantity:
You may also consider:
Cheltenham Eggbutt Gag Bit
cheltenham eggbutt gag bit biEggbutt cheek bits stop the pinching which can be associated with loose ring bits. These bits are good for novice riders or horses that are fussy in their mouths, as the cheek reduces any subtle movements felt from the rein. Gag bits work by raising the bit in the horses mouth by using the roof and upper bars, this in turn raises the horses head. Such bits are used in conjunction with rope or leather gag cheeks. These cheeks are rolled, so that the bit can slide freely up and down. The bars are the areas of gum on the upper and lower jaws, between the front and back teeth, where the bit sits. These days it is considered inhumane to use the roof of the mouth, as it has little flesh to protect it and so it is not often used. Gag bits should be used on two reins, so that the snaffle action can be used for the most part and the correctional gag rein only when necessary to raise the horse's head. This Cheltenham Eggbutt Gag bit is available in four sizes, make your selection from the pull down menu. Established in the late eighteenth century (1700s) the Eldonian brand is one of the original and most respected names in riding hardware throughout the equestrian world. Eldonian is owned and marketed by Jeffries, under whose supervision only the finest stainless steel is used, to manufacture bits in a carefully-controlled engineering environment. This ensures that Eldonian stainless steel hardware meets the exacting standards of quality, strength, reliability and safety demanded by today's discerning riders.



Price: 19.50
(16.25 ex VAT)


(Approx. 21.62 USD, 18.26 EUR, 2,405.10 JPY)

Size:
Quantity:
Balding Gag Bit
balding gag bit biLoose ring bits give a more subtle form of communication between horse and rider than fixed cheek bits, like eggbutt or full cheek bits. Gag bits work by raising the bit in the horses mouth by using the roof and upper bars, this in turn raises the horses head. Such bits are used in conjunction with rope or leather gag cheeks. These cheeks are rolled, so that the bit can slide freely up and down. The bars are the areas of gum on the upper and lower jaws, between the front and back teeth, where the bit sits. These days it is considered inhumane to use the roof of the mouth, as it has little flesh to protect it and so it is not often used. Gag bits should be used on two reins, so that the snaffle action can be used for the most part and the correctional gag rein only when necessary to raise the horse's head. This Balding Gag bit is available in two sizes, make your selection from the pull down menu. Sizing Loose Ring Bits - there should be a 1/4" gap each side of the horse's face. Loose ring bit which are too narrow can nip the horse's lips because the cheek slides through the hole in the mouthpiece and the lips can be pulled into the gap. Please take care to get the sizing right, as we cannot take back used horse bits. How to correctly adjust the height of your new bit. It is best to do most of the adjustment before putting the bridle on the horse so, put the bit onto the bridle then hold it up to the side of the horse's face. Then put the top of the headpiece level with the top of the horse's head (poll) and the mouthpiece of the bit level with the corner of the mouth. Next adjust the bridle to fit. The cheekpieces should be adjusted, so that the bit lies in the correct position in the horse's mouth, i.e. leaving a little wrinkle at each corner of the mouth. Do not fit the bit to high, so that the horse appears to be grinning. Do not fit the bit too low, so that the bit hits the horse's teeth. Established in the late eighteenth century (1700s) the Eldonian brand is one of the original and most respected names in riding hardware throughout the equestrian world. Eldonian is owned and marketed by Jeffries, under whose supervision only the finest stainless steel is used, to manufacture bits in a carefully-controlled engineering environment. This ensures that Eldonian stainless steel hardware meets the exacting standards of quality, strength, reliability and safety demanded by today's discerning riders.



Price: 22.90
(19.08 ex VAT)


(Approx. 25.39 USD, 21.44 EUR, 2,823.95 JPY)

Size:
Quantity:

Would you like to check stock availability? Call Sara or Paul on 01494 775577 (if not from UK please call 0044 1494 775577) Mon-Sat 9.30 a.m. to 5.00p.m. Please Note: We do not accept orders by telephone and enquiries are better placed by email too. When ordering on-line, please note that we do not deduct any money from your credit card, until the goods are being despatched. Please also note that you may alter the quantity of goods in your basket at any time.

 

Contact us: sales@saddler.co.uk or telephone 01494 775577 during working hours.


© Cox the Saddler 2017.    
Sitemap
SEARCH



YOUR SHOPPING BAG
Checkout   Details
Coupon Code?
  

HELP IS AT HAND

Dear Customers, We don't want you to struggle or waste your time, any queries just give us a call on +44 1494 775577 and we will do our best to help, whether it's about walking stick length, suitcase wheel compatibility or Barbour jacket size.


CUSTOMERS SAY

Paul and Sara, The suitcase wheels have arrived and have been fitted successfully. Thanks for a great service.

D.T., Milton Keynes
I received my goods today, and I am very impressed with the swift and friendly service I have received. I have registered on your website because I think it is important to choose independent retailers over national chains wherever possible.
James M., Salford
Many thanks - order received 9/2/11 - son was very pleased with his present (and worth the wait!)

Jeff O., Hampshire
I just wanted to thank you for the quick turnaround of my order - it has just arrived.

Many thanks

Dionne M., Fleet
Thanks Paul, received the jacket as I was leaving for a weekend away. It is exactly what I wanted. thanks


Michael H., Carlisle
Brady bag arrived today. I am thankful to you. I will do some shopping again in your store. Thank you.

Norifumi S., Japan
I used your hasp to repair my guitar case, its common problem But now i have solution ...
I will post on Facebook how I repaired the case, I am sure it will help others ... and maybe they Will look at your other products :-) Cheers.

W. Nees, Belgium
Hi Paul, just had the specks case delivered it is a nice and well made case. Thank you for your great service
and quick dispatch of my order.
I have bookmarked your site(very nice and easy to use). For future orders and I will be telling my friends about
your great selection of leather and other things. Once again many thanks.
Best Regards.

John H., Cumbria
I really appreciated the help with this, its been bugging me for years. No more faulty suitcase wheels. I'll remember your site. Best wishes.

Sheila M., Whitby
Dear Paul, Sara and Alice, The custom made belt has arrived safely in Doha. I am very very pleased with it - a work of art. Thank you very much for shipping it here. All the best.

Peter A., Qatar